I just completed my build of the SARduino 644/1284 board from the Dangerous Prototypes Free PCB drawer. The board was created by Andrew Schamp of Space Age Robotics and made available as a Guest PCB on Dangerous Protoypes. The picture above shows the completed SARduino running a modified Blink example compiled and loaded via the Arduino IDE.
I will provide more info in future posts, but here are some details:
- uC: ATmega1284P @ 16Mhz (capable of 20Mhz) – 128K FLASH, 16k SRAM, 4K EEPROM, 32 io, 2 UARTs
- Arduino 1.0 compatible
- Optiboot bootloader for easy FTDI uploads (modified for auto-reset)
- SARduino 644/1284 @ Space Age Robotics
- Arduino and Optiboot for ATmega1284P by maniacbug
- SARduino 1284 parts list – mouser.com
- SARduino 644 parts list – mouser.com
- Programmed via 6pin ICSP header using a USBASP clone from eBay
- Build location: OHM Space, Oklahoma City, OK, USA
0 Comments.