10Pin – Lcsoft Studio

Image

lcsoft

ISP Pinout

10P Pinout - Lcsoft

Connections

Lcsoft Atmega8 Arduino Notes
ICSP-1 PB3/MOSI D11/PWM
ICSP-2 VCC VCC/3V regulator via JP1
ICSP-3 Not connected
ICSP-4 PD1/TXD D1 via 1K ohm
ICSP-5 PB2/SS/OSC1B D10/PWM Also to JP2-X (PC8/RESET)
ICSP-6 PD0/RXD D0
ICSP-7 PB4/MISO D12
ICSP-8 GND
ICSP-9 PB5/SCK D13
ICSP-10 GND
LED-G PC0/ADC0 A0/D14 Active LOW (1K pullup to VCC)
LED-R PC1/ADC1 A1/D15 Active LOW (1K pullup to VCC)
JP1 Connects ICSP-2 to VCC or 3.3 regulator
JP2 Connects PB2/ICSP-5 to PC8/RESET. Used to reprogram bootloader.
JP3 Connects PC2 to GND.  Used to put bootloader in program mode.

Back to Project Ten Pin

Leave a Comment


NOTE - You can use these HTML tags and attributes:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>